Upgrade and Maintenance Manual RX2540 M4
9.8.2.3 Installing the rear air grid riser module 2 . . . . . . . . . . 279
9.8.2.4 Removing the rear air grid riser module 2 . . . . . . . . . . 279
9.9 Expansion cards in riser modules (HL) . . . . . . . . . . . 280
9.9.1 Installing an expansion card in riser module 1 . . . . . . . . . 280
9.9.1.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . 280
9.9.1.2 Installing an expansion card in a riser module . . . . . . . 281
9.9.1.3 Remove the slot cover for the riser module 1 . . . . . . . . 281
9.9.1.4 Remove the rear air grid riser module 1 . . . . . . . . . . . 281
9.9.1.5 Concluding steps . . . . . . . . . . . . . . . . . . . . . . 282
9.9.2 Removing an expansion card from riser module 1 . . . . . . . 282
9.9.2.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . 282
9.9.2.2 Removing an expansion card from a riser module . . . . . 283
9.9.2.3 Installing the slot cover in the riser card holder . . . . . . . 283
9.9.2.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . 283
9.9.3 Installing an expansion card in riser module 2 . . . . . . . . . 284
9.9.3.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . 284
9.9.3.2 Installing an expansion card in a riser module 2 . . . . . . 284
9.9.3.3 Installing the air grid extension to the riser module 2 . . . . 284
9.9.3.4 Remove the slot cover for the riser module 2 . . . . . . . . 284
9.9.3.5 Remove the rear air grid riser module 2 . . . . . . . . . . . 285
9.9.3.6 Concluding steps . . . . . . . . . . . . . . . . . . . . . . 285
9.9.4 Removing an expansion card from riser module 2 . . . . . . . 285
9.9.4.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . 285
9.9.4.2 Removing the expansion card . . . . . . . . . . . . . . . . 286
9.9.4.3 Installing the slot cover in the riser card holder . . . . . . . 286
9.9.4.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . 286
9.9.5 Replacing expansion cards in riser modules . . . . . . . . . . 286
9.9.5.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . 287
9.9.5.2 Removing the defective expansion card . . . . . . . . . . 287
9.9.5.3 Installing the new expansion card . . . . . . . . . . . . . . 288
9.9.5.4 Connecting cables to the expansion card . . . . . . . . . . 288
9.9.5.5 Connecting a FBU to the expansion card . . . . . . . . . . 288
9.9.5.6 Concluding steps . . . . . . . . . . . . . . . . . . . . . . 288
9.9.6 Replacing a riser card . . . . . . . . . . . . . . . . . . . . . . 289
9.9.6.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . 289
9.9.6.2 Removing the riser card . . . . . . . . . . . . . . . . . . . 289
9.9.6.3 Installing the new riser card . . . . . . . . . . . . . . . . . 290
9.9.6.4 Connecting cables to the expansion card . . . . . . . . . . 290
9.9.6.5 Connecting a FBU to the expansion card . . . . . . . . . . 290
9.9.6.6 Concluding steps . . . . . . . . . . . . . . . . . . . . . . 290
9.10 GPGPU cards in riser modules (FL) . . . . . . . . . . . . . 290
To Next Page
Loading...
