Fujitsu PRIMERGY RX2540 M4

RX2540 M4 Upgrade and Maintenance Manual 397
Accessible drives
Figure 275: Installing the ODD (A)
Ê Thread front panel cable C1 and USB cable C2 through the bay of the
chassis.
Ê Insert the ODD module.
Figure 276: Installing the ODD (B)
Ê Press on the latch from topside (see arrow 1), while sliding in the ODD drive,
to make the engagement of ODD latch easier.
Ê Push the ODD latch upward, so that ODD latch is engaged firmly (2).