Description of function
① Step display of the Safety Integrated commissioning Wizards
② Control type
③ Function selection
④ Navigation
Figure10-8 Safety Integrated commissioning using the web server (example)
Changes to Safety Integrated settings are only possible in the "Safety Integrated
commissioning" mode. The drive is in the safe state as soon as the commissioning mode
is active. Safe Torque O (STO) is active.
Commissioning of Safety Integrated must be completely run through. No settings are applied
if an interruption occurs during commissioning.
The activated user management protects against unauthorized changes to Safety Integrated
settings. Login takes place when the web server starts. After this, only authorized users
Commissioning (web server)
10.5Functions and menus
SINAMICS G220 converter
234 Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
To Next Page
Loading...
