Siemens SINAMICS G220 - Page 589

- 8560 -
1
Data sets Command Data Sets (CDS)
© Siemens AG
2 3 4 5 6 7 8
V6.02.00
[2513.2]
CDS3
CDS2
CDS1
CDS0
t t
t
Number of Command Data Sets (CDS)
p0170 (2)
r0836 r0836.0..3 Command Data Set CDS selected r0836.0 1 = CDS selection bit 0 r0836.1 1 = CDS selection bit 1 r0836.2 1 = CDS selection bit 2 r0836.3 1 = CDS selection bit 3 r0050 r0050.0..1 Command Data Set CDS effective r0050.0 1 = CDS effective bit 0 r0050.1 1 = CDS effective bit 1
c0811
(0)
Command data set selection CDS bit 1
c0810
(722.3)
Command data set selection CDS bit 0
p0810 = "0" CDS0 selected r0836.0 = 0
p0810 = "1" CDS1 selected r0836.0 = 1
CDS0 effective r0050.0 = 0
CDS1 effective r0050.0 = 1
Example: Change over Command Data Set CDS0 --> CDS1
Figure14-179 8560 - Command Data Sets (CDS)
Functions
14.11Drive functions
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 587