Siemens SINAMICS G220 - Page 655

- 2548 -
1
Internal control/status words Status word, faults/alarms 1 (r2139)
© Siemens AG
2 3 4 5 6 7 8
V6.02.00
Bit No. Meaning
r2139 r2139.0..15
Status word faults/alarms 1
r2139.31 = Fault present r2139.51 = Safety message present r2139.71 = Alarm present r2139.121 = Alarm class bit 1
01 00 02 03 05 06 07 08 10 11 12 14 13 04 09 15
r2139.01 = Being acknowledged r2139.11 = Acknowledgment required r2139.131 = Maintenance required r2139.111 = Alarm class bit 0
Reserved
[2510.2] [2510.2]
[8060.8] [8070.7] [8065.7] [8065.7] [8065.7] [8065.7]
r2139.141 = Maintenance urgently required
r2139.151 = Fault gone/can be acknowledged
Reserved Reserved Reserved
[8060.8] [8065.7]
Reserved Reserved
Figure14-223 2548 - Status word faults/alarms 1
Functions
14.11Drive functions
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 653