RM0090 Advanced-control timers (TIM1&TIM8)
Doc ID 018909 Rev 4 354/1422
● Interrupt/DMA generation on the following events:
– Update: counter overflow/underflow, counter initialization (by software or
internal/external trigger)
– Trigger event (counter start, stop, initialization or count by internal/external trigger)
– Input capture
– Output compare
– Break input
● Supports incremental (quadrature) encoder and hall-sensor circuitry for positioning
purposes
● Trigger input for external clock or cycle-by-cycle current management
To Next Page
Loading...
Need help?
General
