3-66 Phaser 6180MFP Multifunction Printer Service Manual
Error Messages and Codes
5 Check the Front Cover Harness for
continuity.
1.Disconnect P/J272 from the Right Side
Harness.
2.Disconnect P/J2721 from the Transfer
Unit.
3.Check continuity between P/J272 <=> P/
J2721.
Go to step 6. Replace the
Front Cover
Harness.
6 1.Replace the Transfer Unit (page 8-9).
2.Does the error still occur when the printer
is turned On?
Replace the
MCU Board
(page 8-88).
Complete.
Troubleshooting Procedure Table (continued)
Step Actions and Questions Yes No
To Next Page
Loading...
