Phaser 6180MFP Multifunction Printer Service Manual 10-5
Plug/Jack and Wiring Diagrams
251 1 G-111 Connects the Feed Drive Assembly (Tray 2 Motor)
with Right Side AIO Harness.
261 4 I-153 Connects the Humidity/Temperature Sensor and
Humidity/Temperature Harness.
272 1 H-111 Connects the Front Cover Harness and Right Side
AIO Harness.
273 2 G-127 Connects the Right Side AIO Harness and Optional-
550 Sheet Feeder (Feeder Unit Harness).
275 1 H-109 Connects the Tray 1 (MPT) No Paper Harness and
Right Side AIO Harness.
276 1 H-110 Connects the Exit Clutch Harness and Right Side
AIO Harness.
311 2 G-125 Connects the CRUM Sensor (Y) and CRUM
Harness.
312 2 G-125 Connects the CRUM Sensor (M) and CRUM
Harness.
313 2 G-124 Connects the CRUM Sensor (C) and CRUM
Harness.
314 2 G-123 Connects the CRUM Sensor (K) and CRUM
Harness.
401 3 F-137 Connects the Image Processor Board and AIO I/F
Harness.
480 3 D-139 Connects the Image Processor Board and AIO
Controller Harness.
481 4 E-151 Connects the Power Switch and AIO Inlet Harness.
501 4 G-153 Connects the LVPS and AIO LVPS Harness.
502 4 F-153 Connects the LVPS and AIO 24V Harness.
503 4 G-153 Connects the LVPS and Fan.
504 4 G-153 Connects the LVPS and AIO I/F Harness.
2321 2 D-126 Connects the Feeder Unit (No Paper Sensor) and
Registration Sensor Harness.
2322 2 D-126 Connects the Feeder Unit (Registration Sensor) and
Registration Sensor Harness.
2411 2 F-126 Connects the OHP Sensor Board and OHP Sensor
Harness (not used on 6180MFP).
2412 2 E-127 Connects the OHP LED Board and OHP Sensor
Harness (not used on 6180MFP).
2721 1 B-108 Connects the Transfer Unit and Front Cover
Harness.
2751 1 E-112 Connects the Tray 1 (MPT) No Paper Sensor and
Tray 1 (MPT) No Paper Harness.
2761 1 H-109 Connects the Main Drive (Exit Clutch) and Exit
Clutch Harness.
Print Engine Plug/Jack Designators (continued)
P/J Map Coordinates
Remarks
To Next Page
Loading...
