DDeevviiccee CCoonnffiigguurraattiioonn
Select the Device Configuration button to display a list of the various hardware components and options that
are available on the press and their status. Hardware components and options include any optional feeding and
finishing devices attached to the press.
SSooffttwwaarree VVeerrssiioonn
Select the Software Version button to display a list of the software versions for the various system
components, including any optional feeding and finishing devices.
PPrriinntt RReeppoorrttss
This Print Reports button is enabled by the system administrator. From the various reports available, select a
report on the touch screen and then select the Start button to print. Some reports are only available in the
system administrator mode.
From the Print Reports screen, select:
• Job Status
• Copy Reports
• Scan Reports
• Network Controller Job Report
• Job Counter Report (available in System Administrator mode only)
• Auditron Report / Meter Report (available in System Administrator mode only)
MMaaiinntteennaannccee AAssssiissttaanntt
Select the Maintenance Assistant button to send the Xerox Remote Print Services diagnostic information on
the press to Xerox Support. Also, when logged in as an Administrator, Communication Test under Maintenance
Assistant helps the press to upgrade software and NVM values through Xerox Remote Services. For more
information, refer to System Administrator Guide.
OOtthheerrss
From the Others window, select the Overwrite Hard Disk button. This feature is a standard data security
function on the system. It prevents the document image and registered data that is recorded on the press hard
disk from being illegally retrieved or removed.
Job image data stored on the hard disk within the press can be deleted and overwritten after a number of
overwrites or a period of time specified by the system administrator. The Standby status indicates the
completion of the overwriting process.
Faults Tab
The Faults tab provides access to a list of current faults affecting the press and some detailed information about
the fault such as when it occurred. Access this tab by pressing the Machine Status button on the UI and selecting
the Faults tab on the screen.
FFaauulltt HHiissttoorryy
This column identifies the fault code number assigned to the fault message.
DDaattee//TTiimmee
This column indicates the day and time the fault occurred.
Xerox
®
Versant
®
280 Press User Documentation 109
Working With
To Next Page
Loading...
