Xerox Versant 280 User Manual

2. Hold the center of the paper guides and gently slide them to the desired paper size so that they are touching
the edges of the paper.
If the distance between the guides is too long or short relative to the paper, paper jams may occur.
If set by the system administrator, the Tray Properties window displays on press UI.
3. From the Tray Properties window, enter or verify the correct paper information.
4. Select OK to save the information and close the Tray Properties window.
Printing on Special Media
HHoollee--ppuunncchheedd PPaappeerr
Load hole-punched paper into tray T1 long-edge feed (LEF) with the holes on the right side as you face the front of
the Inserter device.
TTaabb SSttoocckk
Load tab stock paper in tray T1 long-edge feed (LEF) with the tabs on the left side as you face the front of the
Inserter device.
184
Xerox
®
Versant
®
280 Press User Documentation
Working With

Xerox Versant 280 Specifications

General

Brand	Xerox
Model	Versant 280
Category	Power Tool
Language	English