FFiillee LLiisstt
Select a folder and then select this button to display the File List screen. You can confirm or delete files stored in
the folder.
Using the Store to Folder Feature
Note: Folders must be created before using the win feature. Refer to the System Administrator Guide for
detailed information and instruction on creating folders.
1. From the User Interface, press the Clear All button.
2. Press the Home button.
3. Select Store to Folder.
4. Select the desired destination folder.
5. Load your original documents in the document feeder or on the document glass.
6. Select the desired scan options.
7. Press Start to begin scanning.
8. Retrieve the original documents from the Document Feeder or the Document Glass.
Store to USB
Store to USB Overview
The Store to USB feature allows you to scan documents and save the scanned data to a USB memory device.
Use the following USB memory devices:
• A formatted USB memory device
• A USB 2.0 compliant memory device (USB 1.1 is not supported.)
• A USB memory device with a storage capacity of up to 128 GB
Before using the Store to USB feature, review the following information:
• A USB memory device encrypted with software is not supported.
• A commercially available Memory Card Reader with a single slot can be used for this feature, but the safe
performance of this reader is not guaranteed. When a Memory Card Reader with multiple slots is used, only one
particular slot is available.
• When a USB memory device is inserted into the USB memory slot during the Power Saver mode, the UI touch
screen does not light. After exiting the Power Saver mode by pressing the Power Saver button, insert the USB
memory device again or select Store to USB on the Home window.
• Before removing the USB memory device, make sure that a window indicating that data is being transferred is
not displayed. If you remove the USB memory device while the data is being stored, the data in the device may
be damaged. You can also view Job Status to confirm if the data has been stored to the USB memory device.
Using the Store to USB Feature
1. Load your original documents in the document feeder or on the document glass.
92
Xerox
®
Versant
®
280 Press User Documentation
Working With
To Next Page
Loading...
Need help?
General
