NUMBER DESCRIPTION
1 Select this setting (-2 / Lower / Low 2) when your finished booklet is five pages or
less and on lightweight paper (100 g/m
2
or lower). The least amount of pressure
that can be applied to the booklet is -2.
2 Select this setting (-1 / Low / Low 1) when you want less pressure applied to the
spine of the booklet. The less pressure applied to the booklet, the more rounded the
booklet spine will be.
3 Auto / Normal is the default setting and is used for most jobs.
4 Select this setting (+1 / High / High 1) when you want a greater amount of
pressure applied to the spine of the booklet, but not as much as the +2 setting uses.
5 Select this setting (+2 / Higher / High 2) when you want the most amount of
pressure applied to the spine of the booklet. The more pressure applied, the more
square the booklet spine will be. The greatest amount of pressure that can be
applied to the booklet is +2.
BBooookklleett EExxaammppllee
The following illustration shows two different booklet types:
1. This booklet is not square-folded; it has a rounded, thicker appearance to the spine.
2. This booklet is square-folded; the booklet spine is flattened and squared, giving a perfect-bound book
appearance.
Trim Feature
Access the trim feature from your computer print driver, the press UI, or the print server.
TTrriimm OOppttiioonnss
When using the trim options, always consider the following:
214
Xerox
®
Versant
®
280 Press User Documentation
Working With
To Next Page
Loading...
