SquareFold
®
Trimmer Fault Code Information
When a fault occurs, such as paper jams, open doors or covers, or a press malfunction, the press stops printing and
a message appears on the press touch screen.
The touch screen also displays a Faults button which provides information about the fault and detailed instructions
for correcting the fault.
Tip: SquareFold
®
Trimmer faults are identified by the codes which start with the three-digit number 001133.
Guidelines for Using the SquareFold
®
Trimmer Device
Full-Page Images on Booklets
When using full-page images, ensure that the finished booklet size accommodates any full-page images and that
when the booklet is trimmed, these images are not truncated.
The following are examples of a booklet with preprinted front/back covers with a full-page image but different sizes:
1. Booklet 1 is printed on 8.5 x 14 in./B4 paper: The front cover, which was trimmed, displays the entire image.
2. Booklet 2 is printed on 8.5 x 11 in./A4 paper: The image on the front cover is truncated after trimming it.
422
Xerox
®
Versant
®
280 Press User Documentation
Troubleshooting
To Next Page
Loading...
Need help?
General
