Xerox Versant 280 User Manual

REPLACING CONSUMABLE SUPPLIES
The following items are the Customer Replaceable Units (CRU) for the press. It is recommended that you have a
supply of these items available to eliminate down time when they need to be replaced.
• Dry Ink/Toner cartridges (C, M, Y, K)
• Drum cartridges (C, M, Y, K)
• An empty Waste Dry Ink/Toner bottle
• Suction Filter
Refer to www.xerox.com for the latest consumable part numbers.
Note: The Fuser Module may be replaced by the customer only if directed to do so by Service.
Note: Store supply items and Xerox parts in their original packages in a convenient location. Always recycle/
dispose the used CRU according to the disposal instructions supplied with the new CRU.
Ordering Supplies
Xerox supplies, paper, and throughput material can be ordered from the web site www.xerox.com and clicking on
the Supplies link. For any item that is not orderable from the web site, contact your Xerox Service Representative.
Note: The cleaning pads used with the ROS Window cleaning wand are not orderable. Contact your Xerox
representative for any additional cleaning pads.
CRUS (SUPPLY ITEM) REORDER QUANTITY
APPROXIMATE PRINT YIELD
(FULL COLOR 8.5X11/A4
PRINTS)
Black Dry Ink/Toner Cartridge 1 per box, 2 per press 50,000
Cyan Dry Ink/Toner Cartridge 1 per box 55,000
Magenta Dry Ink/Toner Cartridge 1 per box 51,000
Yellow Dry Ink/Toner Cartridge 1 per box 51,000
Waste Dry Ink/Toner Bottle 1 45,000
Suction Filter 1 200,000
Drum Cartridge (R1) 1 per box 348,000
Drum Cartridge (R2) 1 per box 348,000
Drum Cartridge (R3) 1 per box 348,000
Drum Cartridge (R4) 1 per box 348,000
OHCF Feed Roll Kit 1 kit 500,000
Standard Finisher Staple Cartridge and
Staple Waste Container
4 Staple Cartridges (5,000
staples per cartridge) and 1
Staple Waste Container per
5,000 staples each cartridge
234
Xerox
®
Versant
®
280 Press User Documentation
Working With

Xerox Versant 280 Specifications

General

Brand	Xerox
Model	Versant 280
Category	Power Tool
Language	English