Finishing Devices Troubleshooting
BUSINESS READY FINISHER TROUBLESHOOTING
BR Finisher Paper Jams
Clearing Jams in the BR Finisher at Position 3a
1. If the paper is visible at the output tray exit, remove the paper by pulling it gently in the direction shown.
2. Open the front door of the Business Ready Finisher.
3. Lift green handle 3a.
4. Carefully remove the paper.
• If the paper is torn, remove all torn pieces from the finisher.
• If the paper is inaccessible, or if the press User Interface (UI) prompts you to release the paper, turn green
handle knob 3b in the direction shown.
Xerox
®
Versant
®
280 Press User Documentation 349
Troubleshooting
To Next Page
Loading...
