ITEM
SPECIFICATION
Hole Punch NNoorrtthh AAmmeerriiccaa: 2–3 Hole Punch
EEuurrooppee: 2–4 Hole Punch; 4 Hole Swedish Punch (Optional)
Booklet Maker
• Saddle stitch 2–16 sheets (7 sheets at 106–176 g/m
2
uncoated, or 5 sheets at
177–220 g/m
2
coated)
• Bi-fold up to 5 sheets
• Letter, Legal, Tabloid, A3, A4, 12 x 18 in., SRA3 supported
INTERFACE DECURLER MODULE AND INTERFACE DECURLER MODULE WITH INLINE
SPECTROPHOTOMETER (ILS)
The Interface Decurler Modules (IDM) are optional finishing devices that are used in conjunction with other
optional finishing devices.
Two Interface Decurler Modules are available with the Xerox
®
Versant
®
280 Press:
• Interface Decurler Module (IDM)
• Interface Decurler Module (IDM) with Inline Spectrophotometer (ILS)
The Interface Decurler Modules provide the following functions:
• Communication between the press and the attached finishing device
• An aligned paper path between the press and the attached finishing device
• Cooling and decurling of the paper as it exits the press
Optional Performance Customization and the Interface Decurler Module with Inline Spectrophotometer
There are three different performance customization configurations available with the press:
• Xerox
®
Versant
®
280 Press with basic print engine configuration performance
• Xerox
®
Versant
®
280 Press with All Stock Rated Speed (ASRS) configuration performance (optional)
Note: If you purchase the optional All Stocks Rated Speed (ASRS) package, the Interface Decurler
Module for All Stocks Rated Speed (ASRS) is required, regardless of any additional finishing devices.
• Xerox
®
Versant
®
280 Press with Performance Package (PP) configuration performance (optional)
Xerox
®
Versant
®
280 Press User Documentation 173
Working With
To Next Page
Loading...
