Xerox Versant 280 User Manual

Tip: HCS faults are identified by the codes which start with the three-digit numbers 004499.
Additional HCS Troubleshooting Information
Hints and Tips for Using the High Capacity Stacker (HCS)
Refer to the following hints and tips when using the HCS:
1. Check the paper in the applicable HCS tray for curl.
a. If no curl is present and if the output is acceptable and meets customer satisfaction, you are finished.
b. If no curl is present and if the output is not acceptable, call for service.
c. If curl is present, continue to the next step.
2. To correct the paper curl, use the paper curl correction controls on the top of the Interface Decurler Module
(IDM).
3. If the output has not improved, adjust the paper curl again.
4. If the output still has not improved, call the Customer Support Center.
372
Xerox
®
Versant
®
280 Press User Documentation
Troubleshooting

Xerox Versant 280 Specifications

General

Brand	Xerox
Model	Versant 280
Category	Power Tool
Language	English