Xerox Versant 280 - Printing Saddle-stitched Booklets with Full Bleed, Trimmed Edges, and Inserting Preprinted Covers; Creating Booklets with Full Bleed with the EX Print Servers

f. On the Media tab, set Paper source to Tray 5 (bypass).
g. On the Finishing tab, for Delivery options, select the Offset Catch Tray or specific Top Tray that you want to
use to collect the prints. Specify delivery of the output to the Offset Catch Tray or a Top Tray.
7. Click Print, then monitor the printing.
PRINTING SADDLE-STITCHED BOOKLETS WITH FULL BLEED, TRIMMED EDGES, AND
INSERTING PREPRINTED COVERS
Important: The following print job workflows require you to have an Inserter device, a Production Ready
Booklet Maker Finisher, a Crease and 2-Sided Trimmer, and a SquareFold Trimmer.
This workflow produces an appealing look on the printed output because:
• The booklet maker creates saddle-stitched booklets
• The two trimmers cut off the edges on three sides of the booklets so that the images extend to the edge of the
pages
• Preprinted cover pages are inserted into the workflow with the Inserter device
There is one workflow scenario for the Xerox
®
EX 280 and EX-i 280 Print Servers, Powered by Fiery
®
.
Creating Booklets with Full Bleed with the EX Print Servers
This procedure requires the following finishing devices:
• A Production Ready Booklet Maker Finisher
• A Crease and Two-Sided Trimmer device
• Inserter device
• SquareFold
®
Trimmer device
The booklet maker creates saddle-stitched booklets, while the two trimmers cut the edges off three sides of the
booklets so that the images extend to the edge of the pages. With the Inserter device, you can insert preprinted
cover pages in this workflow. This full-bleed output produces an appealing look for some documents.
The setup for this type of workflow includes:
• Loading the paper and programming it at the press UI
• Submitting the job and opening Job Properties
• Setting Properties for the media, layout, folding and trimming
• Selecting the settings to insert preprinted covers
• Releasing the job for a Proof copy
• Checking the output and making any adjustments to the trim settings or imposition
• Printing the job
Print the file first with no trim to see how much trim is needed to achieve a full bleed of page images.
220
Xerox
®
Versant
®
280 Press User Documentation
Working With