2. Move the lever 1d upward and remove the jammed paper.
Note: If paper is torn, check inside the machine and remove it.
3. If the paper cannot be removed, turn the knob 1c clockwise, then remove the jammed paper.
4. Return the lever 1d to the original position.
5. Close the front door of the feeder module.
Note: If the front cover of the feeder module is not completely closed, a message will appear and the press
will not operate.
TRAYS 8 AND 9 FAULT MESSAGES
When a fault occurs, such as paper jams, open doors or covers, or a press malfunction, the press stops printing and
a message appears on the press UI. A graphical illustration shows the location of the fault with a brief explanation
of corrective actions for clearing the fault. If a fault occurs in more than one location, the illustration changes to
indicate the multiple locations and the required corrective actions.
Trays 8 and 9 Fault Code Information
When a fault occurs, such as paper jams, open doors or covers, or a press malfunction, the press stops printing and
a message appears on the press UI.
The UI also displays a Faults button which provides information about the fault and detailed instructions for
correcting the fault.
Tip: Trays 8 and 9 faults are identified by the codes which start with the three-digit number 117788.
Xerox
®
Versant
®
280 Press User Documentation 339
Troubleshooting
To Next Page
Loading...
