4. Pinch both sides of the staple refill (1)and remove it from the cartridge (2).
5. Insert the front side of the new staple refill into the staple cartridge(1), then push the rear side into the
cartridge(2).
6. Close the front door of the Business Ready Finisher.
Replacing Staples in the Booklet Maker
1. Open the front door of the Business Ready Finisher.
2. Grasp the booklet maker handle and pull the unit toward you until the staple cartridges appear on the top edge
of the device.
3. To remove the staple cartridge from the booklet maker, push down on the staple cartridge handle as shown,
then pull the cartridge out and up.
4. Turn the staple cartridge over.
256
Xerox
®
Versant
®
280 Press User Documentation
Working With