INDICATOR MODE FUNCTION
Manual Downward
Curling
• When the printed output is curled
downwards, select the curl-down button.
• There are three downward curl correction
values.
• The bottom three indicators show which
level of downward curl correction is
selected.
• The bottom indicator is the lowest amount
of downward curl correction that can be
applied to a printed output.
Pressing the curl-up button changes the curl correction levels as shown:
Pressing the curl-down button changes the curl correction levels as shown:
INSERTER DEVICE
Note: This optional finishing device requires an Interface Decurler Module.
180
Xerox
®
Versant
®
280 Press User Documentation
Working With
To Next Page
Loading...
