2. From the Tray Properties window, verify that the correct paper information is being used including size, type,
weight and paper curl or alignment option for the tray. Select OK and close the Tray Properties window.
3. At the tray, slide the rear skew adjustment lever to the right.
4. Gently push in the tray until it comes to a stop.
5. Run your print job:
• If the paper is fed accurately without skew and the printed output is satisfactory; your task is complete.
• If the paper is skewed and the printed output is unsatisfactory; proceed to the next step.
6. Pull out the tray slowly until it stops.
7. Verify the tray and paper settings at the print server.
8. Return the rear skew adjustment lever to its left, default position.
9. Slide the right-side skew adjustment lever toward the front of the paper tray.
10. Gently push in the tray until it comes to a stop.
11. Run your print job:
• If the paper is fed accurately without skew and the printed output is satisfactory; your task is complete.
• If the paper is skewed and the printed output is unsatisfactory; proceed to the next step.
12. Pull out the tray slowly until it stops.
13. Return the right-side skew adjustment lever toward the rear of the paper tray; this is its default position.
14. Gently push in the tray until it comes to a stop.
Trays 6 and 7 Specifications
ITEM
SPECIFICATION
Paper Capacity 1 Tray: 2,000 sheets plus top Storage Cabinet
2 Tray: 2,000 sheets per tray (total of 4000 sheets)
Important: When using up to Xerox 24 lb., 90 g/m
2
bond
paper.
Sheet Sizes 1 Tray: 182 x 250 mm (7.2 x 10 in.), B5 to 330 x 488 mm (13 x 19.2
in.), SRA3
1 Tray, with Postcard Bracket: 100 x 148 mm minimum
2 Tray: 102 x 152 mm (4 x 6 in.) to 330 x 488 mm (13 x 19.2 in.),
SRA3
2 Tray, with Postcard Bracket: 98 x 148 mm minimum
Paper Weight 52–400 g/m
2
Xerox
®
Versant
®
280 Press User Documentation 139
Working With
To Next Page
Loading...
Need help?
General
