Xerox Versant 280 User Manual

Trays 6 and 7 Troubleshooting
TRAYS 6 AND 7 PAPER JAMS
Paper Jams When the Bypass is Installed on Trays 6 and 7
Tip: Always ensure that all paper jams, including any small, ripped pieces of paper, are cleared before proceeding
with any print jobs.
1. Remove the paper currently loaded in the Bypass (Tray 5).
2. Lift and open the Top Cover of the Bypass (Tray 5).
3. Remove any jammed paper.
Note: If paper is torn, check inside the press and remove it.
Xerox
®
Versant
®
280 Press User Documentation 327
Troubleshooting

Xerox Versant 280 Specifications

General

Brand	Xerox
Model	Versant 280
Category	Power Tool
Language	English