Xerox Versant 280 User Manual

CRUS (SUPPLY ITEM) REORDER QUANTITY
APPROXIMATE PRINT YIELD
(FULL COLOR 8.5X11/A4
PRINTS)
carton
Booklet Maker Finisher Staple Cartridge 4 pack: 5,000 staple refills
each
5,000 staples each cartridge
Business Ready (BR) Finisher Staple
Cartridge
1 Staple Cartridge 5,000 staples per cartridge
Business Ready (BR) Finisher with Booklet
Maker Staple Cartridge
4 pack: 5,000 staple refills
each
5,000 staples per cartridge
Staple Refills for the Business Ready
Finisher and Business Ready Finisher with
Booklet Maker
3 refills per carton 5,000 each refill for a total of
15,000
Checking the Status of Consumables
When a consumable is reaching the time it should be replaced, a message is displayed on the press UI. This
indicates when it is time to order and/or install a new consumable item. With some CRUs, the screen indicates that
the press may continue to run print jobs without immediately replacing the item. Otherwise, when it is time to
replace it, a message appears and the press stops running.
1. Press the Home button on the UI.
2. Press Machine Status and select the Supplies tab.
The Supplies area shows a 1 to 100% indicator bar of the remaining amount of dry ink/toner. Remaining dry
ink/toner is updated in 10% increments.
3. From the Supplies pull-down menu, select Other Consumables to view the status of other consumables, such
as the drum cartridges the Dry Ink/Toner Waste Bottle, and any applicable optional devices (such as the OHCF
feed rolls).
Note: The status of the Fuser and Suction Filter are not shown, but a message displays when these items
require replacing.
Xerox
®
Versant
®
280 Press User Documentation 235
Working With

Xerox Versant 280 Specifications

General

Brand	Xerox
Model	Versant 280
Category	Power Tool
Language	English