Xerox Versant 280 User Manual

Entire staple raised up Staple raised up with center pressed inward
Important:
• Depending on the type of paper being stapled, the staple nails may be bent. If the bent nails are stuck inside
the finisher, they may eventually cause paper jams.
• When you open the cover of the staple cartridge, remove any bent staples; otherwise staple jams may occur.
Use the cover of the staple cartridge only when removing jammed staples.
Clearing Staple Jams in the Basic Stapler
If the staple cartridge accidentally detaches from its holder, refer to Reinserting the Basic Staple Cartridge.
Note: Ensure that the press is not running before performing this procedure.
1. Open the finisher front cover.
Xerox
®
Versant
®
280 Press User Documentation 411
Troubleshooting

Xerox Versant 280 Specifications

General

Brand	Xerox
Model	Versant 280
Category	Power Tool
Language	English