Xerox Versant 280 User Manual

Clearing Paper Jams from SquareFold
®
Trimmer Area E3
Note: Ensure that the press is not running before performing this procedure.
1. Open the right cover of trimmer device by pressing the button on the cover.
2. Remove the jammed paper.
3. Close the right cover of the trimmer device.
4. If the press indicates there are additional paper jams, follow the instructions to clear the paper and to resume
printing.
SquareFold
®
Trimmer Fault Messages
When a fault occurs, such as paper jams, open doors or covers, or a press malfunction, the press stops printing and
a message appears on the press touch screen. A graphical illustration shows the location of the fault with a brief
explanation of corrective actions for clearing the fault. If a fault occurs in more than one location, the illustration
changes to indicate the multiple locations and the required corrective actions.
The touch screen also displays a Faults button which provides information about the fault and detailed instructions
for correcting the fault. The (EE) code on the upper-left part of the Fault message displays which error indicator is lit
on the SquareFold
®
Trimmer control panel (E1–E3).
Xerox
®
Versant
®
280 Press User Documentation 421
Troubleshooting

Xerox Versant 280 Specifications

General

Brand	Xerox
Model	Versant 280
Category	Power Tool
Language	English