Maintenance
CLEANING THE PRESS OVERVIEW
• Before you start to clean the press, be sure to switch off the power using the rear breaker switch and unplug the
press. Cleaning the press without switching off the power may cause an electric shock.
• Always use a dry lint-free cloth for all cleaning actions unless otherwise directed.
• Do not use benzene, paint thinner, other volatile liquids, or spray insect repellent on the press as doing so may
discolor, deform, or crack covers.
• If a moistened cloth is used, wipe afterwards with a dry lint-free cloth. Cleaning the press with an excessive
amount of water may cause the press to malfunction and/or damage documents during printing.
Cleaning the Exterior
1. Wipe the exterior with a soft cloth moistened with water. If dirt is difficult to remove, try gently wiping with a
soft cloth moistened with a small amount of neutral detergent.
2. Wipe off any excess water from the exterior with a soft cloth.
Cleaning the Document Cover and Glass
1. Cleaning the document cover
a. Raise the document feeder.
Xerox
®
Versant
®
280 Press User Documentation 229
Working With
To Next Page
Loading...
Need help?
General
