Sample Job
When making multiple copies, you can continue making copies after making and examining a sample set. You can
choose to continue or cancel the job after confirmation.
To print a sample of the job, perform the following:
1. Press the Home button on the User Interface (UI).
2. Select Copy on the Home window.
3. Select Job Assembly > Sample Job.
4. Select On.
5. Select Save.
6. Load the documents in the document feeder or on the document glass.
7. Program the job with the Copy desired features/options.
8. Enter the quantity.
9. Press Start.
One copy set of the job (the sample set) is printed and the remainder of the job is placed on hold and the
press is paused.
10. If desired, change any applicable setting and copy quantity.
11. Select Start to finish the job or Cancel to stop the job.
Selecting Start continues the copy process and the programmed number of sets will be printed. Retrieve the
copies from the output area.
12. Upon completion, press the Clear All button on the UI to return the settings to their default state.
Combine Original Sets
This feature allows you to copy sets of documents that cannot be loaded into the document feeder. This is useful
when copying documents that may be damaged, ripped or torn, or too wrinkled to go through the document
feeder. Combine Original Sets allows you to copy each original by placing it on the document glass and creating
one copy job for the entire set.
1. Press the Home button on the press UI.
2. Select Copy on the Home window.
3. Select the Job Assembly tab.
4. From the Job Assembly tab, select CCoommbbiinnee OOrriiggiinnaall SSeettss.
5. Select On or Off.
• On: Select this option to have the Next Original option highlighted on the copy screen when scanning is in
process.
• Off: Select this option to have the Last Original option highlighted on the copy screen the scanning process
is in process.
6. Select Save to save your choice.
This feature is available only when Collated is selected in the Copy Output window.
74
Xerox
®
Versant
®
280 Press User Documentation
Working With
To Next Page
Loading...
