Xerox Versant 280 - Crease and Two-Sided Trimmer Fault Code Information; C;Z Folder Troubleshooting; C;Z Folder Paper Jams

Crease and Two-Sided Trimmer Fault Code Information
When a fault occurs, such as paper jams, open doors or covers, or a press malfunction, the press stops printing and
a message appears on the press touch screen.
The touch screen also displays a Faults button which provides information about the fault and detailed instructions
for correcting the fault.
Tip: Crease and Two-Sided Trimmer faults are identified by the codes which start with the three-digit numbers 001122,
001133, 001144, 002244, and 002288.
C/Z FOLDER TROUBLESHOOTING
C/Z Folder Paper Jams
• The press stops running and a fault message displays on the press touch screen.
• The message includes a graphical illustration showing the location of the fault along with a brief explanation of
corrective actions for clearing the fault.
• Paper jams may occur in multiple areas of the press and any optional devices connected to the press. When this
happens, the graphical illustration changes to show the multiple locations and the required corrective actions.
• Additionally, if a fault occurs with the C/Z Folder, an indicator lights on the PR Finisher control panel and shows
the corresponding area on the C/Z Folder where the fault occurred.
388
Xerox
®
Versant
®
280 Press User Documentation
Troubleshooting