SSoolluuttiioonnss
• Select the option on the press touch screen.
• Check that there are staples in the staple cartridge.
• Check that the punch scrap container is not full.
HOLE-PUNCH OUTPUT HAS HOLES ON THE WRONG SIDE
PPrroobblleemm
The hole-punch output has the paper holes are on the wrong side.
SSoolluuttiioonnss
Ensure that the hole-punch paper is loaded correctly in the paper tray, and that the holes are positioned as shown
on the tray label.
PRINTING TAKES TOO LONG FOR FIRST PRINT OR FIRST COPY OUT
CCooppyy oorr PPrriinntt JJoobbss WWiitthh aa CCoommbbiinnaattiioonn ooff CCoolloorr aanndd BBllaacckk--aanndd--WWhhiittee OOuuttppuutt
PPrroobblleemm
For jobs that are a combination of color and black and white, the first copy or print output takes longer than the
expected 10 seconds.
JJoobb WWoorrkkfflloowwss aanndd FFiirrsstt CCooppyy oorr PPrriinntt OOuuttppuutt TTiimmee FFaaccttoorrss
The following workflow scenarios affect the extended wait-time for the first copy or print output:
• Copy or print jobs that are 1–2 pages only versus copy or print jobs that are more than 2 pages
• The number of users in the print queue
• Copy or print jobs that use the same type of media versus copy or print jobs that contain mixed media types
• Copy or print jobs that use a mixture of color and black-and-white output
If you do not use one of these workflows, the implementation of this solution can result in color stability issues.
SSoolluuttiioonn
To decrease the wait-time for first copy or print out, perform the following:
1. Increase the Power Saver time to 30 minutes.
If the wait time remains too long, continue to the next step.
2. For this user requirement, to change the NVM values for 752–175 and 740–437, contact Xerox Technical
Customer Support. For more information, refer to the Xerox
®
Versant
®
280 Press System Administrator
Guide.
3. For Copy mode, on the press UI, set Output Color to Auto Detect.
The default setting is Auto Detect.
Xerox
®
Versant
®
280 Press User Documentation 281
Troubleshooting
To Next Page
Loading...
Need help?
General
