3. Press
4. Interface Decurler Module (IDM) (Optional)
5. Inserter Module (Optional)
6. High-Capacity Stacker (Optional)
7. Two-sided Trimmer (Optional)
8. C/Z Folder (Optional)
9. Production Ready (PR) Finisher Plus (Optional)
10. Plockmatic MPS XL (Multi-Purpose Stacker) (Optional)
Locating the Press Serial Number
The press serial number can be accessed from the User Interface (UI) or from the serial number plate which is
located on the inside frame of Tray 1.
1. Press the Machine Status button on the UI.
2. From the Machine Status screen, ensure that the Device Information tab is displayed.
The press serial number is displayed under Device Serial Number near the bottom of the screen.
3. If there is a loss of power and it is not possible to access the Machine Status screen, the press serial number
can also be found on the inside frame of the press near the Paper Tray 1 drawer:
a. At the press, fully open Tray 1.
b. At the left of the tray, on the press frame, locate the plate with the serial number (SSEERR##).
Xerox
®
Versant
®
280 Press User Documentation 19
Learning About