Xerox Versant 280 - Fault Messages on the Interface Decurler Module; Fault Code Information on the Interface Decurler Module; Inserter Device Troubleshooting; Inserter Paper Jams (VP180 only)

Fault Messages on the Interface Decurler Module
When a fault occurs, such as paper jams, open doors or covers, or a press malfunction, the press stops printing and
a message appears on the press touch screen. A graphical illustration shows the location of the fault with a brief
explanation of corrective actions for clearing the fault. If a fault occurs in more than one location, the illustration
changes to indicate the multiple locations and the required corrective actions.
The touch screen also displays a Faults button which provides information about the fault and detailed instructions
for correcting the fault.
Fault Code Information on the Interface Decurler Module
When a fault occurs, such as paper jams, open doors or covers, or a press malfunction, the press stops printing and
a message appears on the press touch screen.
The touch screen also displays a Faults button which provides information about the fault and detailed instructions
for correcting the fault.
Tip: Interface Decurler Module faults are identified by the codes which start with the three-digit number 004488.
INSERTER DEVICE TROUBLESHOOTING
Inserter Paper Jams
The following occurs when there is a fault, such as paper jams, open doors or covers, or a press malfunction:
• The press stops running and a fault message displays on the press touch screen.
• The message includes a graphical illustration showing the location of the fault along with a brief explanation of
corrective actions for clearing the fault.
Xerox
®
Versant
®
280 Press User Documentation 357
Troubleshooting