Clearing Jams in the BR Finisher at Position 3d
1. Open the front door of the finisher and locate green lever 3d.
2. Move green lever 3d to the right.
3. Carefully remove the paper.
Note: If the paper is torn, remove all pieces from the finisher.
4. Return green lever 3d to its original position.
5. Close the front door of the Business Ready Finisher.
Clearing Jams in the BR Finisher at Position 4
1. Open the front door of the Business Ready Finisher.
Xerox
®
Versant
®
280 Press User Documentation 351
Troubleshooting