Xerox Versant 280 - Clearing Jams in the BR Finisher at Position 3 c

5. Return green handle 3a to its original position.
6. Close the front door of the Business Ready Finisher.
Clearing Jams in the BR Finisher at Position 3c
1. Open the front door of the Business Ready Finisher.
2. Move green lever 3c to the left.
3. Carefully remove the paper.
• If the paper is torn, remove all torn pieces from the finisher.
• If the paper is inaccessible, or if the press User Interface (UI) prompts you to release the paper, turn green
handle knob 3b in the direction shown.
4. Return green lever 3c to its original position.
5. Close the front door of the Business Ready Finisher.
350
Xerox
®
Versant
®
280 Press User Documentation
Troubleshooting