Xerox Versant 280 User Manual

Power On or Off the Press
THE POWER SWITCHES
There are three power switches on the press:
• The Breaker switch located at the rear of the press. Initially check to ensure that this switch is set to On when
the press is shipped.
• The Main Power switch located inside the Front Door. This switch is used mainly by the Xerox Service
Representative when servicing the press. In rare problem-solving cases, you are directed to power off the press
with this switch.
• The Power On/Off button located on the top of the press near the Document Feeder. This button is the primary
way for you to power on or off the press. It is used by the operator as the workflow requires.
46 Xerox
®
Versant
®
280 Press User Documentation
Working With

Xerox Versant 280 Specifications

General

Brand	Xerox
Model	Versant 280
Category	Power Tool
Language	English