11. After removing the jammed document, follow the instructions to reload the entire document set into the
document feeder.
Note: Ensure that there are not any torn, wrinkled, or folded documents in the document set. To scan torn,
wrinkled or folded documents, use the Document Glass, only. The already scanned document sheets are
automatically skipped and scanning resumes from the document sheet last scanned prior to the jam.
Document Jams Under the Document Feeder Belt
1. Open the document feeder.
2. Open the belt of the document cover while gripping the lever and remove the jammed document.
3. Gently return the belt to the original position.
4. Close the document feeder.
5. Follow the instructions to reload the entire document set into the document feeder.
Note: Ensure that there are not any torn, wrinkled, or folded documents in the document set. To scan torn,
wrinkled or folded documents, use the Document Glass, only. The already scanned document sheets are
automatically skipped and scanning resumes from the document sheet last scanned prior to the jam.
318
Xerox
®
Versant
®
280 Press User Documentation
Troubleshooting
To Next Page
Loading...
