1. Open the finisher front cover.
2. Pull out the R4.
3. Discard all waste from the container.
Important: Be sure to completely empty the container. If any waste or scraps remain, the container
becomes full before a full message displays causing a fault to occur.
4. Return R4 to its original position.
5. Close the finisher front cover.
PR Finisher Plus Maintenance
For information on consumable supplies and maintenance procedures for the PR Finisher Plus, refer to the following:
Xerox
®
Versant
®
280 Press User Documentation 269
Working With
To Next Page
Loading...
