CCoolloorr CCooppyy oorr CCoolloorr PPrriinntt JJoobbss
PPrroobblleemm
For copy or print jobs that are color only, for the first copy or print output, the printing takes longer than the
expected 10 seconds.
CCoolloorr JJoobb WWoorrkkfflloowwss aanndd FFiirrsstt CCooppyy oorr PPrriinntt OOuuttppuutt TTiimmee FFaaccttoorrss
The following workflow scenarios affect the extended wait-time for the first color copy or print output:
• Copy or print jobs that are 1–2 pages only versus copy or print jobs that are more than 2 pages
• The number of users in the print queue
• Color copy or print jobs that use the same type of media versus copy or print jobs that contain mixed media
types
• Copy or print jobs that use only a color output
If you do not use one of these workflows, the implementation of this solution can result in color stability issues.
SSoolluuttiioonn
To decrease the wait-time for first copy or print out, perform the following:
1. Increase the Power Saver time to 30 minutes.
If the wait time remains too long, continue to the next step.
2. For this user requirement, to change the NVM values for 752–175 and 740–437, contact your Xerox
Technical Customer Support. For more information, refer to the Xerox
®
Versant
®
280 Press System
Administrator Guide.
3. For Copy mode, on the press UI, set Output Color to Auto Detect.
The default setting is Auto Detect.
REDUCING DRY INK/TONER CONSUMPTION
PPrroobblleemm
In order to maintain image quality (IQ), the press enters Adjust Image Quality mode. In this mode, dry ink/
toner is consumed in the form of dry ink/toner bands and process control patches being laid down. Frequency of
image quality adjustment is dependent on many factors including area coverage. While printing jobs of low
area coverage or low image density, the frequency of image quality adjustment can be greater.
SSoolluuttiioonn
Three NVM values can be adjusted to reduce dry ink/toner consumption based on user requirements. Refer to
the following table. From the first column of the table, select the solution which best fits user requirements. To
implement the appropriate outcome for your environment, contact Xerox Technical Customer Support.
Important: NVM values must be set or changed only by the customer support representative.
282
Xerox
®
Versant
®
280 Press User Documentation
Troubleshooting
To Next Page
Loading...
Need help?
General
