USER REQUIREMENT
SOLUTION
1. Image Quality (IQ) Priority
These are the press default settings which provide
optimum IQ output, but increase dry ink/toner
consumption and can reduce productivity.
For this user requirement, to change the NVM values
for 762–075, 752–175 and 762–098, contact Xerox
Technical Customer Support.
2. Middle Setting
This is the recommended setting.
These settings configure the press for less dry ink/toner
usage if image quality is not the highest priority. IQ can
be reduced slightly.
For this user requirement, to change the NVM values
for 762-075, 752–175 and 762–098, contact Xerox
Technical Customer Support.
3. Lower Toner Consumption Priority
These settings decrease dry ink/toner usage and increase
productivity, but can result in degraded IQ.
For this user requirement, to change the NVM values
for 762–075, contact Xerox Technical Customer
Support. For the NVM values 752–175 and 762–
098, no change is required.
Xerox
®
Versant
®
280 Press User Documentation 283
Troubleshooting
To Next Page
Loading...
Need help?
General
