c. When prompted, select Logout.
TRAYS 6 AND 7 MAINTENANCE
Consumable Supplies for Tray 5-9
CRUS (SUPPLY ITEM) REORDER QUANTITY
APPROXIMATE PRINT YIELD
(FULL COLOR 8.5X11/A4
PRINTS)
Feed Roll Kit (Trays 5–9) 1 kit 300,000
**Each tray requires its own feed roll kit. Each kit contains all the required items for replacing the feed rolls.
Important: Three feed roll kits are available:
• Reorder number: 000088RR1133119966 for Tray 5
• Reorder number: 000088RR1133119955 for Tray 6, 1-Tray Oversized High Capacity Feeder
• Reorder number: 000088RR1133116699 for Trays 6-9, 2-Tray Advanced Oversized High Capacity Feeder or Dual
Advanced Oversized High Capacity Feeder; 1 roll kit is required for each tray.
For more information, contact the Customer Support Center.
Replacing Tray 5 Feed Rolls
Use this procedure by Tray 5 is installed on top of Trays 6 and 7.
Tip: Replace the bypass tray feed rolls when experiencing frequent multifeeds, single feeds, or blank prints in the
stack of the output prints.
Use this procedure to replace the Bypass tray feed rolls, which includes:
• Feed Roll
• Nudger Roll
• Separator Roll
Note: After you replace all of the feed rolls, contact your system administrator who will reset the HFSI
counter for these CRU components to zero (0).
1. Locate and access the Bypass Tray on top of Trays 6 and 7.
Xerox
®
Versant
®
280 Press User Documentation 243
Working With
To Next Page
Loading...
Need help?
General
