SSeeppaarraattoorr TTrraayy // SSeeppaarraattoorr aanndd HHaannddoouutt TTrraayy // HHaannddoouutt TTrraayy
This option varies depending on the selected transparency option. Select the desired tray that contains the
separator and/or handout stock.
Optional Folding
Note: This feature is available only if the appropriate, optional finishing device is attached to your press.
Review the following information before using theFolding option.
• If your press is equipped with an optional Folder, you can make copies or prints using theFolding feature.
• Depending on the finishing device, the Folding option can fold your output in half (single or bi-fold) or in thirds
(C-fold or Z-fold types).
• The Folding option can be selected for both your copy and network print jobs.
• Depending on the copy/print job, the Folding option can be selected from the press UI or from the print driver
on your workstation.
• The Folding option can also be selected at the print server for the selected job.
• In order to use the folding option, the orientation of documents must be short-edge feed (SEF). You must select
a paper tray that contains SEF stock.
Folding options include:
• Single Fold (Bi-Fold): Select this option to fold the output copies in half.
• C-Fold: Select this option to fold the output copies in thirds.
• Z-Fold: Select this option to fold the output copies with two folds that are folded in opposite directions, resulting
in a type of fan fold.
• Z-Fold Half Sheet: This option has two folds that are folded in opposite directions, with two unequal folds. The
two unequal folds allow one edge of the sheet to have a longer edge which allows for stapling or hole punching.
• Image Inside Fold: Folds copies so that the image is printed on the inside.
• Images Outside Fold: Folds copies so that the image is printed on the outside.
Job Assembly Feature
Job Assembly Feature Overview
Janet Webster
Job Assembly includes the following features:
• Build Job
• Sample Job
• Combine Original Sets
• Delete Outside / Delete Inside
72
Xerox
®
Versant
®
280 Press User Documentation
Working With
To Next Page
Loading...
Need help?
General
