Xerox Versant 280 - How to Use the Store to Web Services for Devices (WSD) Feature

the press. The scanned data is then sent to a specified network computer.
The following options are available with Store to WSD:
• Computer: Select this option to start a scan job by sending a request from a network computer, then forward
the scanned data to a network computer. The scan job will be operated from the network computer.
– To operate the scan job from a network computer, use an application which supports image loading feature
such as Windows Fax and Scan.
– Windows Fax and Scan is not available for computers with Windows Vista Home Basic or Windows Vista
Home Premium. To perform a scan from such a computer, use a different method, for example, using the
Paint application and selecting the option From Scanner or Camera.
• This Device: Select this option to start a scan job from the press UI, and then forward the scanned data to a
network computer. When this option is selected, a list of available computers is displayed; from this list select
the computer that will receive the scanned data.
– When This Device is selected, a List of Components is displayed.
– This list shows computer names and four processing methods including Scan to User PC (this is a specified
network computer), Scan for Print to User PC, Scan for E-mail to User PC, and Scan for OCR to User PC.
How to Use the Store to Web Services for Devices (WSD) Feature
UUssiinngg tthhee SSttoorree ttoo WWSSDD FFeeaattuurree
1. From the press UI, press the Clear All button.
2. Load your original documents in the document feeder or on the document glass.
3. Press the Home button.
4. Select Store to WSD.
5. From the Start Scan Job From window, choose one of the following options:
• Computer; go to Starting a Scan Job from a Network Computer.
• This Device; go to Starting a Scan Job from This Device.
SSttaarrttiinngg aa SSccaann JJoobb ffrroomm aa NNeettwwoorrkk CCoommppuutteerr
Ensure that the original documents are loaded and that Computer is selected on the Start Scan Job From window.
Note: The following procedure describes the scan method using Windows Fax and Scan with Windows 7.
1. Select Operate from Computer.
The UI displays a standby message stating that a scan job is waiting.
2. To exit the standby mode, selectDelete.
The UI displays a Remove Your Original message.
3. Remove your originals and select OK.
4. Reload your originals.
5. From the network computer, select Start > All Programs > Windows Fax and Scan.
6. At the bottom of the left pane, select Scan, then selectNew Scan from the toolbar.
Xerox
®
Versant
®
280 Press User Documentation 95
Working With