Xerox Versant 280 - GBC AdvancedPunch Pro

5. Select Maintenance.
The Maintenance screen displays.
6. Use the up/down arrows to scroll through the Maintenance screens until you see Print Action When Using
Tray T1 (Inserter)
7. Select Print Action When Using Tray T1 (Inserter).
The Tray T1 purge function screen displays.
8. Select the desired purge function option:
• Standard: Select this option to switch off the purge function. It decreases productivity, but the press
continues to run even when tray T1 runs out of paper. This may cause some printed output sets to be
delivered to the designated finishing tray without inserts.
• Speed First: This setting maintains productivity. Select this option to have the press stop printing and
purge paper when tray T1 runs out of paper.
Note: Speed First is the default setting.
9. Select Save or OK.
The Maintenance screen displays.
10. Select Close.
The main Tools tab screen displays.
11. Exit the administrator mode.
GBC
®
ADVANCEDPUNCH
®
PRO
The GBC
®
AdvancedPunch
®
Pro is an automatic hole punch module that integrates with the press to streamline the
production of reports, directories, pricing guides and other bound books. It equals or betters traditional quality while
saving time and increasing productivity by eliminating the labor-intensive steps of manual punching. The compact
AdvancedPunch
®
Pro takes minimal space and accepts a variety of optional multiple hole punch die sets.
The AdvancedPunch
®
Pro can be connected to a variety of optional finishing devices and sits inline with these
devices.
Note: This optional finishing device requires an Interface Decurler Module.
The AdvancedPunch
®
Pro provides the following capabilities:
186
Xerox
®
Versant
®
280 Press User Documentation
Working With