• AAllwwaayyss AAlllloowweedd: The device powers off automatically after the specified time, and the cumulative Low Power
mode and Sleep mode time outs have elapsed.
• AAlllloowweedd OONNLLYY WWhheenn tthhee CCoonnddiittiioonnss aarree MMeett: The device automatically powers off only after time outs have
elapsed. The device also powers off if USB Drive, and Wired and Non-Wired Network are not activated.
To change the Power Saver settings, refer to the User Documentation at www.xerox.com/VERSANT_280docs. For
more details, contact your System Administrator or refer to the System Administrator Guide.
To enable Auto Power Off mode, contact your System Administrator. For details, refer to the System Administrator
Guide at www.xerox.com/VERSANT_280docs.
To learn more about Xerox participation in sustainability initiatives, go to:
• www.xerox.com/environment or
• www.xerox.com/environment_europe
Default Power Saver Settings
This device is ENERGY STAR
®
qualified under the ENERGY STAR Program Requirements for Imaging Equipment. The
Low-Power mode time can be configured up to 30 minutes. The default value is 1 minute. The Sleep mode time can
be configured up to 30 minutes. The default value is 1 minute. Sleep mode begins after the configured time of
inactivity rather than time after Low-Power mode.
To change the Default Power Saver settings, contact your System Administrator, or refer to the System
Administrator Guide at www.xerox.com/VERSANT_280docs.
Note: Changing the default Power Saver activation times can result in an overall higher energy consumption
of the device. Before you turn off Power Saver modes or set a long activation time, consider the increase in
device power consumption.
Eurasian Economic Union Compliance
The EAC mark applied to this product indicates certification for use on the markets of the Member
States of the Customs Union.
Turkey RoHS Regulation
In compliance with Article 7(d), we hereby certify “it is in compliance with the EEE regulation EEE yönetmeliğine
uygundur.” (Compliant with EEE Regulations).
Ukraine RoHS Compliance
Обладнання відповідаєвимогам Технічного регламенту щодо обмеження
використання деяких небезпечних речовин в електричному та електронному
обладнані, затвердженого постановою Кабінету Міністрів України від 3 грудня 2008 № 1057
(The equipment complies with requirements of the Technical Regulation, approved by the Resolution of Cabinet of
Ministry of Ukraine as of December 3, 2008, in terms of restrictions for the use of certain dangerous substances in
electrical and electronic equipment.)
38
Xerox
®
Versant
®
280 Press User Documentation
Learning About
To Next Page
Loading...
Need help?
General
