Xerox Versant 280 - Trays 8 and 9 Paper Jams at Lever 1 d and Knob 1 c

2. Move the lever 1b to the right and turn the knob 1c to the right. Remove the jammed paper.
Note: If paper is torn, check inside the machine and remove it.
3. Return the lever 1b to the original position.
4. Close the front cover of the feeder module.
Note: If the front cover of the feeder module is not completely closed, a message will appear and the press
will not operate.
Trays 8 and 9 Paper Jams at Lever 1d and Knob 1c
1. Open the front cover of the feeder module.
338 Xerox
®
Versant
®
280 Press User Documentation
Troubleshooting