1. Gently extend the Bypass tray (Tray 5) as necessary to accommodate the paper.
2. Hold the center of the paper guides and slide them to the desired paper size.
3. Select the appropriate paper stock for your print/copy job.
4. Open the ream of paper with the seam side facing up.
5. Fan the sheets before loading them into the tray.
6. Insert the paper or media into the tray until it stops.
7. Adjust the paper guides so that they touch the edges of the stack.
If enabled by your System Administrator, the Paper Tray settings/Tray Properties window may be displayed on
the UI.
8. If the Paper Tray settings/Tray Properties window displays on the UI, confirm the correct tray to which it is
printing and other information, including size, type (precut tab), and, if necessary, paper curl and/or alignment
option.
9. Select Confirm or OK to save the information and close the Paper Tray settings/Tray Properties window.
Xerox
®
Versant
®
280 Press User Documentation 127
Working With
To Next Page
Loading...
