1. Pull out the tray toward you until it stops.
2. Remove any paper remaining in the tray.
3. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface. This
procedure separates any sheets that are stuck together and reduces the possibility of paper jams.
4. Load 100–500 sheets of paper. For preprinted media, load the paper with the printed side facing up.
a. Align the edges of the paper against the right edge of the tray (1).
Paper can be loaded in the long-edge-feed (LEF) or portrait direction, or in the short-edge-feed (SEF) or
landscape direction.
b. To adjust the paper guides, press in the guide release lever and move the guides carefully until they touch
lightly the edges of the paper in the tray (2).
Xerox
®
Versant
®
280 Press User Documentation 151
Working With
To Next Page
Loading...
Need help?
General
