6. Grab the Release Handle and pull the Drum Drawer straight out.
7. Remove the old drum cartridge by holding the finger rings provided at both ends of the drum cartridge and
gently lifting up.
Caution: Drums are light sensitive. Do not leave the Drum Cartridge Drawer open for more than one
minute when replacing cartridges. Exposing the drum cartridges to direct sunlight or strong light from
indoor fluorescent lighting for more than one minute can cause image quality defects.
8. Install the new drum cartridge into the press following the guides with the side marked front facing the front.
240 Xerox
®
Versant
®
280 Press User Documentation
Working With
To Next Page
Loading...
