• Ensure that the Original Orientation setting reflects the same orientation as that of the original documents.
BBooookklleett CCrreeaattiioonn OOppttiioonnss
When On is selected, the following Booklet Creation options are available:
OOrriiggiinnaall IInnppuutt
• 1 Sided Originals
• 2 Sided Originals
• 2 Sided Rotated Originals
BBiinnddiinngg SShhiifftt
Use this option to set the booklet binding-shift value within the range from 0 to 1.9 in. (0 to 50 mm) in 0.1 in. or
1 mm increments.
CCoovveerrss
This option allows you to attach covers to the booklet. The front and back covers can be output before the first
page and after the last page of the document and on a different type of paper.
DDiivviiddee OOuuttppuutt
Use this option when you have a large number of original documents. The original documents are divided to
create subsets in order to reduce the thickness of each booklet. The press folds copies in half and piles them up
to form a booklet. The Light Production C Finisher with Booklet Maker allows you to specify the number of
sheets within the range of 1-50 sheets in one-sheet increments.
OOuuttppuutt//OOffffsseett
This option is available only when specific optional finishers are attached, such as the Standard Finisher or
Booklet Maker Finisher.
AAuuttoo IImmaaggee PPoossiittiioonniinngg
This option adjusts the image position so that the printing position from the edge of each page remains
consistent between the inner and outer pages of the booklet. Auto Image Positioning is available for selection if
you have already selected Create Left/Top Bound Booklet or Create Right Bound Booklet.
FFoolldd aanndd SSttaappllee ((ooppttiioonnaall))
Folding and stapling are optional features. These features are available only with finishing devices that provide
these capabilities.
When available, select the desired Fold and Staple option:
• No Fold and Staple: This option produces booklets without folding or stapling.
• Fold Only: This option produces booklets that are folded in half.
• Fold and Staple: This option produces booklets that are folded in half and stapled in the center.
BBooookklleett TTrriimmmmiinngg aanndd PPrreessssiinngg ((ooppttiioonnaall))
Booklet trimming and pressing are available only if the optional SquareFold Trimmer Module is attached to the
Booklet Maker Finisher.
Booklet Trimming and Pressing options include the following:
Xerox
®
Versant
®
280 Press User Documentation 67
Working With
To Next Page
Loading...
