AudioCodes E-SBC

CHAPTER57 Reporting Information to External Party
Mediant 1000 Gateway & E-SBC | User's Manual
Field Description
[305] ■ "1" = “Accounting Start” for CALL_START or CALL_CONNECT
■ "2" = “Accounting Stop” for CALL_END
Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable to SBC media and signaling, and Gateway CDRs.
■ The maximum number of characters for Syslog tabular alignment is 5.
Alerting
Time
[443]
Displays the duration (in milliseconds) between ringing (SIP 180 Ringing) and
call answered (SIP 200 OK) or unanswered (CANCEL).
Note:
■ The field is optional and can be included in the CDR using the SBC CDR
Format and Gateway CDR Format tables.
■ The field is applicable only to "CALL_CONNECT" and "CALL_END"
Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The maximum number of characters for Syslog tabular alignment is 5.
AMD
Decision
Probability
[630]
Displays the success (in percentage) that the answering type (probability) was
correctly detected for the Answering Machine Detection (AMD) feature.
Note:
■ The field is included in the default CDR.
■ The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The default field title is "%" for Syslog.
■ The maximum number of characters for Syslog tabular alignment is 3.
AMD
Decision
[629]
Displays the detected answering type for the AMD feature:
■ "V": voice
■ "A": answer machine
■ "S": silence
■ "U": unknown
Note:
■ The field is included in the default CDR.
■ The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The default field title is "AMD" for Syslog.
■ The maximum number of characters for Syslog tabular alignment is 3.
AOC
Amount
[523]
Displays the total amount charged for the call for the Advice of Charge (AOC)
feature. The field is an integer from 0 to 999999.
Data is stored per call and sent in the syslog as follows:
■ currency-type: amount multiplier for currency charge (euro or usd)
■ recorded-units: for unit charge (1-999999)
- 981 -